Our mail works and delivers goods all over the world on time, regardless of
the current difficult situation in our country.
Stickers are not OEM parts, these are handmade
Stickers are produced on self-adhesive vinyl film with lamination.
We use only high-quality films from well-known manufacturers.
Stickers may differ slightly from the original in color, size, shape.
Waterproof, frost-resistant and heat-resistant, petrol-resistant - (if not
left for a long time in a petrol environment).
Stickers adhere well to paint, varnish and other cleaned smooth surfaces.
When painting the upper casing, you can stick the decal on the base paint and
cover the decal with clear varnish along with the engine casing.
Decals are resistant to ultraviolet light, but over the years, under the
influence of sunlight, over time, everything fades and loses color, be it a
sticker or paint, etc. But this will not happen in the early years.
1. - Great price.
2. - Vinyl films from only the best manufacturers.
3. - There is expedited delivery.
4. - Possibility to supplement the complete set with stickers, plates on your
engine, according to your photos and measurements. - Free of charge. (Send
photos and measurements in a message to us).
5. - Ability to change color, font, size of decals.
Instructions for correct gluing.
1. Prepare a room with a temperature of +20 C and more.
2. Water in a spray device, preferably
distilled water about 300 grams, and add to it
pure soap (no additives) a couple of drops, or very small
piece of solid. Stir well.
3. Prepare a special spatula to remove
drops of water formed under the sticker.
4. Clean wipes not leaving after
5. Ethyl alcohol to remove fat content from
6. Accurately measure the place for sticking.
7. Calculate the surface of the sticking place.
8. Remove grease from the surface of the place of sticking clean
napkin with ethyl alcohol.
9. Remove the film from the back of the sticker, revealing
10. Apply water from a spray bottle, to large parts of the decals on the
and to the surface to which the decals will be glued.
11. Glue the sticker on the surface you need,
we fix the sticker, shifting in place, and squeeze out
Accumulated drops of water with a spatula, removing drops
water to the edge of the sticker.
12. After you need to wait about 24 hours.
No need to test for durability.
For good bonding, 2-3 days are needed.
For expedited shipping, select expedited shipping when purchasing.
All products in our store are located in Ukraine in our warehouse.
Please check your country's inbound mail rules and regulations before
purchasing and inquire about taxable items.
Thank you for your purchase and don't forget about reviews